SmartValve SV9520M2536

SmartValve® SV9520M Standard Opening Gas Control Valve, 1/2 Inch NPT, 1/2 psi, Direct Hot Surface Pilot Ignition


Manufacturer part number:




SmartValve® SV9520M Gas Control Valve, Standard Opening, 1/2 Inch, NPT, 1/2 psi, Direct Hot Surface Pilot Ignition, 20 - 200 cfh, Natural Gas, 24 V Coil, Upright Mount, -40 to 175 deg F, 4.1 Inch L x 3.2 Inch W x 4.9 Inch H, Includes: LP Conversion Kit
  • Straight-through body pattern
  • The control communicates directly with the ST9160 electronic fan timer (EFT) in typical forced warm air furnace applications
  • It can directly interface with the appropriate power supplies and a system thermostat for additional appliance applications
  • When controlled directly by a thermostat, the control does not provide a post purge function, as power to the control is removed when the thermostat call for heat ends
  • This system is suitable for a wide range of fan-assisted combustion, gas fired appliances including furnaces, rooftop furnaces, boilers unit heaters, infrared heaters, water heaters and commercial cooking appliances
  • 0 - 90 deg mounting in any direction from the upright position of the gas control knob, including vertically
  • Flame failure response time: 2 sec at 5µA
  • PrePurge: 15 sec
  • Ignition Sequence: 7/12 sec
  • Flame Sense: two rod
  • Ignition trials to Lockout: 4 trials

Standard/Approvals: CSA Certified

Products specifications
Attribute nameAttribute value
Coil Voltage24 V
Dimensions4.1 Inch L x 3.2 Inch W x 4.9 Inch H
End StyleNPT
Gas TypeNatural Gas
Ignition TypeDirect Hot Surface Pilot
Mounting TypeUpright
Nominal Capacity20 - 200 cfh
Nominal Size1/2 Inch
Pressure Rating1/2 psi
TypeStandard Opening